L4981AD INTEGRATED CIRCUIT

The L4981AD013TR is a Power Factor Corrector provides the necessary features to achieve a very high power factor up to 0.99. Realized in BCD 60II technology this power factor corrector (PFC) pre-regulator contains all the control functions for designing a high efficiency-mode power supply with sinusoidal line current consumption. The L4981 can be easily used in systems with mains voltages between 85V to 265V without any line switch. This new PFC offers the possibility to work at fixed frequency optimizing the size of the input filter; the operating frequency mode working with an average current-mode PWM controller, maintaining sinusoidal line current without slope compensation. Besides power MOSFET gate driver, precise voltage reference (externally available), error amplifier, under-voltage lockout, current sense and the soft start are included. To limit the number of the external components, the device integrates protections as overvoltage and overcurrent.
    Limit line current distortion to <5%
    Universal input mains
    Feed forward line and load regulation
    Average current mode PWM for minimum noise sensitivity
    High current bipolar and DMOS totem pole output
    Under voltage lockout with hysteresis and programmable turn on
    Threshold overvoltage, overcurrent protection
    Precise 2% on chip reference externally available
    Soft-start

Low Voltage Lockout (UVLO): 14.5V Max. Supply Voltage: 19.5V Starting Current: 300µA Supply Current: 12mA Controller Encapsulation: SOIC Number of Pins: 20Pins Frequency: 100kHz Min. Working Temperature: -40°C Max. Operating Temperature: 125°C Moisture Sensitivity Level (MSL): MSL 3 - 168 hours