IR2136SPBF CONTROLLER, 3PH MOSFET, 2136, SOIC28

CoThe IR2136SPBF is a high voltage high speed power MOSFET and IGBT Bridge Driver with three independent high and low-side referenced output channels for 3-phase applications. Proprietary HVIC technology enables ruggedized monolithic construction. Logic inputs are compatible with CMOS or LSTTL outputs, down to 3.3V logic. A current trip function which terminates all six outputs can be derived from an external current sense resistor. An enable function is available to terminate all six outputs simultaneously. An open-drain FAULT signal is provided to indicate that an overcurrent or under-voltage shutdown has occurred. Overcurrent fault conditions are cleared automatically after a delay programmed externally via an RC network connected to the RCIN input. The output driver features a high pulse current buffer stage designed for minimum driver cross-conduction. The floating channels can be used to drive N-channel power MOSFETs/IGBTs in the high-side configuration which operates up to 600V.

    Floating channel designed for bootstrap operation
    Tolerant to negative transient voltage (dV/dt immune)
    Under-voltage lockout for all channels
    Overcurrent shutdown turns OFF all six drivers
    Independent 3 half-bridge drivers
    Matched propagation delay for all channels
    Cross-conduction prevention logic
    High-side outputs out of phase
    3.3V Logic compatible
    Lower di/dt gate drive for better noise immunity

    Externally programmable delay for automatic fault clear

Controller Configuration: Three-Phase Bridge
Peak Output Current: 350mA
Min Supply Voltage: 10V
Max Supply Voltage: 20V
Controller Package: SOIC
Number of Pins: 28Pins
Entry Delay: 400ns
Exit Delay: 380ns
Min Working Temperature: -40 ° C
Max Operating Temperature: 125 ° C
Moisture Sensitivity Level (MSL): MSL 3 - 168 hours